Jump to content

jap engine in a ford?  

40 members have voted

  1. 1. jap engine in a ford?

    • yes
      29
    • no
      11


Recommended Posts

Posted

Jap engines are good as long you don't have to stump up the development cost for someone else to graft it in.

 

I know of two S2000 into MK2's going on at the moment, one in the Reading area & one in Yorkshire. There are a couple of issues (expensive), sump, bellhousing, gearbox & vtec control. Sump has to be custom made, the same for the bellhousing, & one guy opted for a Quaife box. Vtec gets messy as you have to take the S2000 wiring loom, ecu, keys etc - all matched items, or again bespoke ecu. Or you could lock the vtec gubbins in place but this defeats the point of having it.

 

I've been offered a Mazda rotary conversions with a 6 speed sequential for my MK2 but its too expensive for my wallet. Although 300brake & 11500 rpm do sound good :mrgreen:

 

Pound for pound the 200sx lump is a good bet but for drifting you'll need quite a bit of power (or skinny tyres) & this can get pricey.

 

I haven't found the magic jap conversion yet but I'm still looking - don't be put off by what other people think, go the way you want :thumbsup:

Posted

i like the idea,but i think it all depends on your budget,jap engines will need a lot of work to go in,i reckon it will be more work and money than a cosworth conversion

Posted

your all as mad as a box of frogs .

 

you cant even say the word mk3 escort on here without everyone getting on there high horse, but people dont mind saying that a jap engine is good for your F O R D .

 

I DIDNT EVEN READ THE POST AND IT CANT BE JUSTIFIED TO ME . I VOTED NO WITHIN A BLINK OF AN EYE .

 

am not denying they are good but i still wouldnt do it . we dont sopport are own things anoghf as it is in this country .we sell anything decent we have .

 

am not viewing this post again cos i will end up argueing with someone wont i lol .. :oops:

_________________

gremlin seeds

Posted

ok so i lied i did view it again .

 

just have a good think .

but hey its good to see that you dont have blinkers on . at least with a cos 16v or red top or zetec they are good to work on if they go wrong .being realistic mate your looking at driving this car quick in competitions it going to have problems eventualy and you dont want to be having them with a shitty wankle engine . wtf is wrong with thease people pistons have worked for years . have they not heard of the term if its not broke dont fix it .. am just glad there moment of madness didnt have a knock on effect .. :beer:

_________________

recession in the us

Posted

the idea of me suggesting to him to stick a 4A-GE engine in his escort is that:

 

A) he needs to drift so he needs more power and the 4A-GE engine has around 130bhp as standard

 

B) its a 1600cc engine so its not going to be so bad on insurance as most jap engines

 

C) its a 16v so it has better pick up than most 8v engines

 

D) his uncle has a 4A-GE engine waiting around in his garage after taking it out of his AE86 drift car he's building, therefore his uncle also has the required skills to help with the conversion

 

E) if he wants more power its easily available from the 16v unit and if he still wants more power he can do a straight swap for the 20v N/A or Turbo unit that'll just bolt straight in

 

F) the engine is way cheaper to buy, tune and maintain than a cossie engine and the body mods will be about the same as needed to fit a cossie engine

  • Admin
Posted

I voted no and am happy to state why.

 

1) Budget: I know your budget is limited and whilst some of the stated engines may be a relatively small initially outlay, getting them installed, and set up will always carry hidden costs that you hadn't budgeted for.

 

2) Dit value: It may be great to sit in the pub telling your friends you've got a Castella 3GI fanny magnet engine to go into your car, but they'll lose interest when 12 months later you're still trying to make it work and have no beer tokens left because you're spending them all on the car.

 

3) Knowledge: There are plenty of tried and tested routes to installing better more modern engines in to OSF's, plenty of people have done it with these engines and are therefore all available to give advice when you encounter problems (which you will at some stage). If you choose an engine that few people have tried, you're drastically limiting your sources of information and advice.

 

4) Parts availability: Again, use an engine that has been done before and there are plenty of places that can supply parts of the shelf to make it work. Choose a bespoke install and you're on your own, fabrication costs for a one off installation can spiral out of control, bringing me full circle back to one, Budget.

 

 

If I were you I'd be looking at a Zetec, get the right one and your looking at instant power improvement from a cheap source.

 

Dare to be different in 10 years time when your knowledge and skill has improved and you have more money to throw at it.

Posted

as I said, the 4A-GE engine is perfect for him, his uncle knows about them and he has the fabrication skill to help install it aswell, he is knowledgeable in both toyotas and fords so he is the perfect person to do it, plus being a drifter his uncle can then teach him to drift aswell :D

 

Antz needs more power to get him drifting and this is the perfect engine to do it with plus Antz also wants an AE86 aswell and with the prices of them at the moment this is the closest he'll get to one for a while

Posted

thanks guys!

 

i see all your points! im not decided on what engine yet, althought thinking more and more about it i think a 1600 xflow will be next as the 1300 doesnt have the power to kick out in the dry. 8)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...