Jump to content

Recommended Posts

Posted

assume ur talking essex? a bit weighty indeed but have u ever tried to lift a pinto??! lovely rumble and plenty of torque but much more limited on the tuning front than the x-flow or pinto unless you have £££££££££££££

 

I think i have some cotina essex mounts from a savage somewhwre if u need them pm me...

Posted

Pinto's are a heavy old lump, but a 2.0 with the right amount of fettling will be a powerfull engine :wink:

 

1600 Cross-Flow will not look out of place, it's a good lump, and again can produce decent amounts of horses with the right bits :wink:

 

Finally, have you thought of a Rover V8? I wouldn't know how much of a pain it would be to fit, but it is only slightly heavier than the Pinto. For that you get, 4 more cylinders, masses of torque, and a super sexy sound!!!! :wink::D:D:D

Posted
Pinto's are a heavy old lump, but a 2.0 with the right amount of fettling will be a powerfull engine :wink:

 

1600 Cross-Flow will not look out of place, it's a good lump, and again can produce decent amounts of horses with the right bits :wink:

 

Finally, have you thought of a Rover V8? I wouldn't know how much of a pain it would be to fit, but it is only slightly heavier than the Pinto. For that you get, 4 more cylinders, masses of torque, and a super sexy sound!!!! :wink::D:D:D

 

I love a sound of a v8 :D:D

Posted
Pinto's are a heavy old lump, but a 2.0 with the right amount of fettling will be a powerfull engine :wink:

 

1600 Cross-Flow will not look out of place, it's a good lump, and again can produce decent amounts of horses with the right bits :wink:

 

Finally, have you thought of a Rover V8? I wouldn't know how much of a pain it would be to fit, but it is only slightly heavier than the Pinto. For that you get, 4 more cylinders, masses of torque, and a super sexy sound!!!! :wink::D:D:D

 

with jimbob on this one v6 doesnt put out a great deal more power than a pinto (only 50 / 60 bhp if i remember right.) if ur going to put money into it v8 it. :D cheap to buy and tune :wink:

Posted

v6 will be lovely, could work out expensive gettin a good lump, and bits to shoehorn it in, but worth the effort, propper for cruising, and driven rights goes like stink!!!!

 

if it was my cortina i'd go 1760 xflow as it will make life easy, and with a nice big exhaust will sound meaty, and get lots of attention from the boys 8)

Posted
am i the only person who thinks v8's sound poo?

 

have u never been in the pits at the pod /shakes when they run up the drag cars on open headers :?::twisted: it sends a shiver down my spine :twisted: no other engine does that 2 me :!:

 

v8 all the way baby :twisted:

Posted
am i the only person who thinks v8's sound poo?

 

have u never been in the pits at the pod /shakes when they run up the drag cars on open headers :?::twisted: it sends a shiver down my spine :twisted: no other engine does that 2 me :!:

 

v8 all the way baby :twisted:

 

I go to hot rod drags at shakespeare the noise there is awesome some people just dont understand :?

Posted
am i the only person who thinks v8's sound poo?

 

have u never been in the pits at the pod /shakes when they run up the drag cars on open headers :?::twisted: it sends a shiver down my spine :twisted: no other engine does that 2 me :!:

 

v8 all the way baby :twisted:

 

I go to hot rod drags at shakespeare the noise there is awesome some people just dont understand :?

 

think its a bit like marmite. u either get it or u dont :!:

thats how my parents met through drag racing :twisted:

so its defnatly in the blood :!:

Posted
am i the only person who thinks v8's sound poo?

 

have u never been in the pits at the pod /shakes when they run up the drag cars on open headers :?::twisted: it sends a shiver down my spine :twisted: no other engine does that 2 me :!:

 

v8 all the way baby :twisted:

 

I go to hot rod drags at shakespeare the noise there is awesome some people just dont understand :?

 

think its a bit like marmite. u either get it or u dont :!:

thats how my parents met through drag racing :twisted:

 

so its defnatly in the blood :!:

 

but you cant not like it though I do hate marmite :lol::lol::lol:

Posted
am i the only person who thinks v8's sound poo?

 

have u never been in the pits at the pod /shakes when they run up the drag cars on open headers :?::twisted: it sends a shiver down my spine :twisted: no other engine does that 2 me :!:

 

v8 all the way baby :twisted:

 

I go to hot rod drags at shakespeare the noise there is awesome some people just dont understand :?

 

think its a bit like marmite. u either get it or u dont :!:

thats how my parents met through drag racing :twisted:

 

so its defnatly in the blood :!:

 

but you cant not like it though I do hate marmite :lol::lol::lol:

 

ykt :lol::lol::lol::lol::lol::lol:

 

where do u live in ripley as my dad grew up there. :?:

Posted
am i the only person who thinks v8's sound poo?

 

have u never been in the pits at the pod /shakes when they run up the drag cars on open headers :?::twisted: it sends a shiver down my spine :twisted: no other engine does that 2 me :!:

 

v8 all the way baby :twisted:

 

I go to hot rod drags at shakespeare the noise there is awesome some people just dont understand :?

 

think its a bit like marmite. u either get it or u dont :!:

thats how my parents met through drag racing :twisted:

 

so its defnatly in the blood :!:

 

but you cant not like it though I do hate marmite :lol::lol::lol:

 

ykt :lol::lol::lol::lol::lol::lol:

 

where do u live in ripley as my dad grew up there. :?:

 

not far from the five stars pub if you know where that is

Posted

Nice small-block Ford V8. Same weight (ish) as the Essex. Smaller than the Rover V8 (narrower V). and cheaper than chips to get tuning parts. Would look great in the 'Tina engine bay too!

 

Lob a nice T5 behind it and I reckon you've got a bit of a tool :twisted:

Posted
Nice small-block Ford V8. Same weight (ish) as the Essex. Smaller than the Rover V8 (narrower V). and cheaper than chips to get tuning parts. Would look great in the 'Tina engine bay too!

 

Lob a nice T5 behind it and I reckon you've got a bit of a tool :twisted:

 

nice 2 c someone talking sense :wink:

Posted
I love a sound of a v8 :D:D

 

i was gonna say, go find an SD1 in a scrappers (are there any left?) ally block, thinkit only weighs as much as a pinto. 8):ykt:

Posted

4's or 6's or 8's

 

 

sound 8's

 

ease 4's

 

done 4's 6's and 8's (please dont think of doing a 12)

 

 

8's... the rover V8 is a has been, 50's design, and costs a packet to get real power from, weighs more than a pinto (even a YB) when dressed, and is beaten on weight by a 302 with ally heads (thinwall block is years ahead of the Buick8) . My choice on 8's .. 302 or an LS .. with the LS you would have to have some rockers made with the Ford logo...

 

6's Nissan V6 turbo... looks like a GAA with turbos.. or a 24V Cossie.

 

4's .. ermm any of them, but the YB turbo is the the easiest and cheapest option.... daily driver.. a Zetec on TBs or the Cossie YB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...