Rear brake disks Atlas Axle

[JP.]

Just bought myself some cossie rear callipers at the Classic Ford Show for a rear disk conversion on my Capri Atlas Axle. 

Are there ready to fit no machining needed solid brake disks available or is Fiesta mk1 disks and machining the hub flanges of the halfshafts the only route to go. 

Has to go in 13"wheels.

 

 

[colr6]

I've got mk3 solid escort discs for mine and slid straight over the shafts

[Vista]

Will Cossie calipers fit under 13" wheels? Also using mk3 Escort solid discs on mine.

[colr6]

Will Cossie calipers fit under 13" wheels? Also using mk3 Escort solid discs on mine.

I run Cossie calipers and Cossie solid discs in 13" wheels on the twanglia, depending of offset of wheels I have 10mm wheel spacer to clear h/ brake lever otherwise it catches when the wheel distorts a little under cornering

[jamie956]

I have these alloy brackets that go in between the axle and drive shaft flange these work with sierra 2wd cos calipers and the 247mm normal sierra discs had these under 15'' but im sure you can get a bracket to work with 13'' wheels.

 

I got the brackets from atkins motorsport not many people just sell the brackets on there own normally come as part of a kit.

 

If you buy the brackets of him im sure he will put you straight on what discs also he dose the correct hand brake cable with a fitting to go onto the hand brake.

 

 

Im now on 300mm vented discs with 15'' wheels very tight but they go.

 

 

[anglia58]

hi jp, don't juse the mk1 fiesta disc, juse the mk3 fiesta disc, you only have to turn the inside out,

about 1 or 2 mm, they will slide over the originale halfshaft,

cheers marcel