Mk2 escort bits wanted

[colr6]

Starting looking out for some bits to help with the resto of my a Harrier. As follows if anyone can help 😁

n/s/f strut casing std fixed arm type.

Rubber roller top mounts.

Alloy front hubs, std bearing size and std wheel studs.

Rad fan cowling.

Single leaf rear springs.

Vinyl roof trims (2 door ) won’t pay silly money for some probably end up making these.

Set of braided hoses

Steel runners for the front windows what the regulator slides along. And clamps to the glass, no + os Not sure if 2 door are same as 4 door

any help greatly appreciated chaps.

[eeb43]

should have a strut if you can wait till the show unless you go to newark autojumble

[colr6]

3 minutes ago, eeb43 said:

should have a strut if you can wait till the show unless you go to newark autojumble

Be fine Mark, just let me know if you have to knock off the list 👍

[notenoughtime]

Col I didn’t  think harriers had vinyl roofs 

well ive never seen one 👍

[colr6]

1 minute ago, notenoughtime said:

Col I didn’t  think harriers had vinyl roofs 

well ive never seen one 👍

They were an option, although mines not got it on the build plate I like em ! They just seem to balance the car up against the silver paint 😍

[colr6]

8 minutes ago, notenoughtime said:

Col I didn’t  think harriers had vinyl roofs 

well ive never seen one 👍

Here ya go !

[Monza]

23 hours ago, colr6 said:

Here ya go !

That was quick Col....knew you had finished it and were toying with us all along!!! 😉😎👏😂

[colr6]

1 minute ago, Monza said:

That was quick Col....knew you had finished it and were toying with us all along!!! 😉😎👏😂

Nah not done it yet, that pic was just to show one with a vinyl roof. Mine went for shot blasting on Saturday. See what’s left by the end of the week 🤭

[notenoughtime]

Vinyl really suits it actually, look forward to seeing yours finished col!! 

[zondas]

Spot on with the vinyl roof looks mint against the silver i did see one but it was decades ago and i ain't exaggerating must be around 30 years the reason i remembered is because it was a one off in the day i was the only one that liked it except the owner.

[notenoughtime]

On 02/03/2020 at 19:35, colr6 said:

Nah not done it yet, that pic was just to show one with a vinyl roof. Mine went for shot blasting on Saturday. See what’s left by the end of the week 🤭

What was left col? You never let us know or is it that bad lol 

[colr6]

The list is reasonably long, although a lot can be restored. Body will require full floor, lower bulkhead, chassis rails, n/ s A post, front inner wings, o/s/ rear quarter, rear panel A lot of the stuff I have due to cutting a knackered sport up I had which was bought last year. Cut up a sport you say, it was so badly repaired in its life and I couldn’t get the correct paperwork for it from an importer who will remain nameless but if I come across him a rather large bat will wrapped round his skull. This will be put on the back burner for now till I can borrow a jig to build it on.

[notenoughtime]

9 hours ago, colr6 said:

The list is reasonably long, although a lot can be restored. Body will require full floor, lower bulkhead, chassis rails, n/ s A post, front inner wings, o/s/ rear quarter, rear panel A lot of the stuff I have due to cutting a knackered sport up I had which was bought last year. Cut up a sport you say, it was so badly repaired in its life and I couldn’t get the correct paperwork for it from an importer who will remain nameless but if I come across him a rather large bat will wrapped round his skull. This will be put on the back burner for now till I can borrow a jig to build it on.

A jig you say? Mine needs a fork truck to move it though! And currently for a mk1 but could be modified 

[colr6]

1 hour ago, notenoughtime said:

A jig you say? Mine needs a fork truck to move it though! And currently for a mk1 but could be modified 

I’ve a mate with a Caroliner and measuring system which he said I could borrow. Got a date sheet for the measurements for the mk2. Hopefully all to spec once it’s put back together. Won’t be ordering any panels till all this corona crap has finished. Getting all my outside peoples jobs done in case I pop my clogs 😳 can’t leave people with boxes of bits now can I...lol

[RWL81P]

18 minutes ago, colr6 said:

I’ve a mate with a Caroliner and measuring system which he said I could borrow. Got a date sheet for the measurements for the mk2. Hopefully all to spec once it’s put back together. Won’t be ordering any panels till all this corona crap has finished. Getting all my outside peoples jobs done in case I pop my clogs 😳 can’t leave people with boxes of bits now can I...lol

you can leave me all your boxes of escort parts col. i really don't mind.

[colr6]

2 minutes ago, RWL81P said:

you can leave me all your boxes of escort parts col. i really don't mind.

You’d have to get a bigger garage Phil....lol

[RWL81P]

theres some room left in my dads garage! don't worry col. i'll re home it.

[notenoughtime]

I’ll have the cortina then 

[khanlad]

On 26/03/2020 at 19:58, colr6 said:

I’ve a mate with a Caroliner and measuring system which he said I could borrow. Got a date sheet for the measurements for the mk2. Hopefully all to spec once it’s put back together. Won’t be ordering any panels till all this corona crap has finished. Getting all my outside peoples jobs done in case I pop my clogs 😳 can’t leave people with boxes of bits now can I...lol

Pop your clogs? Youre too tight to pay the funeral costs! 

[colr6]

15 minutes ago, khanlad said:

Pop your clogs? Youre too tight to pay the funeral costs! 

Why do you think I got a big log burner, DIY cremation....lol

[Rally Pack 2000]

5 hours ago, khanlad said:

Pop your clogs? Youre too tight to pay the funeral costs! 

 

5 hours ago, colr6 said:

Why do you think I got a big log burner, DIY cremation....lol

When the powers that be asked us to be home bodies during the crisis I dont think your meant to take it literally!!

[RWL81P]

don't talk him out of it, i'm having the escort parts. lol