sambo Posted October 12, 2007 Report Posted October 12, 2007 I drove my new escort for the first time today (Woohoo!!) but the engine is running rough as shit and the brakes are terrible! (box sounded great though!) It has 315 x 32mm front discs and Brembo 4-pot calipers from a porsche 993 carrera. Pretty much the same set-up on the back but with cossie front discs and smaller callipers. I dont have a servo but, Jaysus! i really had to push the pedal down to just start stopping. The pedal is Really solid and i am pretty sure that it isnt a bleeding problem. The question is, if it has race pads on there, do they make that much of a difference as to have shit brakes until they are really warm?? All i know is that they are mintex pads but i dont know what type. What should brakes of this 'quality' feel like? surely better than this??!!!!! cheers all.
Jay_harrier Posted October 12, 2007 Report Posted October 12, 2007 Is the pedal solid? has the master cylinder bore been matched to the calipers? can it move enough fuild?
RETRO_AL Posted October 12, 2007 Report Posted October 12, 2007 My brakes feel very solid and they need to be pushed hard to work,but trust me they will work! dont be afraid to realy push hard and you will see just how good they are,my brakes were realy realy good at retrofords track the other day i was braking from 120mph in no time at all,in fact i sent them on fire and they are still ok lol
Guest MK1gaz Posted October 12, 2007 Report Posted October 12, 2007 Probably got race spec brake pads in it mate which are fooooooookin shiiiiiite until hot . Bin them and get some road pads and fit the race pads on trackdays but remember they won't work on the first 2 laps !!!!!!!!!
oliwally Posted October 12, 2007 Report Posted October 12, 2007 Also check what master cylinder you have,too small will make the pedal horrible while too big it will feel like a switch.
sambo Posted October 13, 2007 Author Report Posted October 13, 2007 cheers guys, i'll look at the cylinder size today and also whip a pad off and check the part number with mintex.
V8ian Posted October 13, 2007 Report Posted October 13, 2007 Has the car been standing and the discs got rusty, , if you dont clean the discs off properly the disc will and pads will glaze and make the brakes horrid.
texr2000 Posted October 13, 2007 Report Posted October 13, 2007 My pedal is hard but you really have to push it the nit normally locks up!!! The prop with brake pads is people fit 'racing' pads etc which are good when the car is 'racing' and the brakes are allot hotter than they would be on the road. You’re better having 2 sets of pads one for road and one for track days etc. End up fitting expensive bits that end up being worse as they cant get to working temp… Bit like 'racing' suspension, good on a track where it is nice and smooth etc but hard and crap on the road....
sambo Posted October 13, 2007 Author Report Posted October 13, 2007 Trouble is, is that i couldnt even lock them up! I was pushing with everything i got and they just didnt want to know!! Scary man.
escort21 Posted October 13, 2007 Report Posted October 13, 2007 I had that with standard mk2 cortina brakes with green stuff linings.....basically no brakes until they warm up
Supercharged Nat Posted October 13, 2007 Report Posted October 13, 2007 also if there new, they will need to bed in before the get really good. id say a combo of needing to bed in, no servo and hard/race pads are to blame
sambo Posted October 14, 2007 Author Report Posted October 14, 2007 Cheers guys, i looked at the pads and they have the sensors built into them with some wires that are obviously for the level indicator (porsche calipers) so that would indicate to me that they are not race pads but road ones? If anyone can help me out here, the part number on the front pads are .... " TEXTAR T428 FF (43P) " I cant find any info on them at all?
RETRO_AL Posted October 14, 2007 Report Posted October 14, 2007 Did you find out your cylinder size ? i will post my size up tomorow m8
john_3.0s Posted October 14, 2007 Report Posted October 14, 2007 a smaller diameter m/cyl will give you more peddle travel but make them feel a bit lighter
sambo Posted October 14, 2007 Author Report Posted October 14, 2007 will check the sizes tomorrow. So how would i know if the master cylinder is too small?? although the previous owner did re-assure me that they are fine.
sambo Posted October 16, 2007 Author Report Posted October 16, 2007 Checked the cylinder sizes today. 0.70 for the rear and .625 for the fronts. Sound about right to you guys? Also found out that the pads are not race items and are just road pads. Hopefully i can drive her again tonight and give my self a secon opinion.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now