Jiffer Posted November 24, 2010 Report Posted November 24, 2010 I was about to order a new prop for my mk2 cortina which is now running with a st170 engine and type 9 gearbox but stoped to think about the axle, is the standard axle, diff and shafts etc out of a 1600 super going to be ok with this or should I look at a repacement, if so what would be the best to look for, price and ease of install are a big factor
James HPE Motorsport Posted November 24, 2010 Report Posted November 24, 2010 It depends what you are going to use it for but on the road, standard components will be absolutely fine!
Jiffer Posted November 24, 2010 Author Report Posted November 24, 2010 road and throwing down the strip, gona give this drag racing thing a shot
banarama Posted November 24, 2010 Report Posted November 24, 2010 road and throwing down the strip, gona give this drag racing thing a shot im going for drag racing next year as well
Jiffer Posted November 25, 2010 Author Report Posted November 25, 2010 how do I tell what axle is in it now? I can only assume it is standard for a cortina mk2 1600 super, but I hear a lot of words chucked about when it comes to axles such as , english atlas, baby atlas, lsd, I am totaly in the dark on this so any help would be great. I dont want to spend money on a new propshaft just for something break after a few runs and find out I should have done my homework. cheers
sambo Posted November 25, 2010 Report Posted November 25, 2010 You'll have the English axle mate. The Atlas is from the Capri and the terms 'narrow' and 'baby' is used to describe different widths. Narrow is 50" and baby is 48.5" . The English axle is 48.5" and is the same as whats factory fitted on Escorts and cortina's etc.
Jiffer Posted November 25, 2010 Author Report Posted November 25, 2010 thanks for the info so I am best looking for a baby atlas ie. from a 3L capri, is it a direct swap? cheers
SmokeEm Posted November 25, 2010 Report Posted November 25, 2010 IMHO your current axle fitted with a slipper would be ok
Stu_B Posted November 25, 2010 Report Posted November 25, 2010 You're only gonna break the halfshafts or diff which are all cheap & easy to replace
Jiffer Posted November 25, 2010 Author Report Posted November 25, 2010 IMHO your current axle fitted with a slipper would be ok slipper? not heard of that
SmokeEm Posted November 25, 2010 Report Posted November 25, 2010 IMHO your current axle fitted with a slipper would be ok slipper? not heard of that Slipper as in Limited Slip Diff
xrt_si Posted November 25, 2010 Report Posted November 25, 2010 I was under the impression that Mk2 Cortina rear axles were wider and came in about 52.5-53.5"?
Ken B Posted November 25, 2010 Report Posted November 25, 2010 Got a bare casing on the floor right now. Mk2 cortina is 49" casing length. 52" is Capri mk2 length but these are rare as most had the atlas type. Remember these are bare casing lengths without drums shafts etc.
Andrade Posted November 25, 2010 Report Posted November 25, 2010 Unless this is your daily I'd say race it as is, if you brake it, replace it. If not, all well and good Do you have a rev limiter just in case?
bortaf Posted November 25, 2010 Report Posted November 25, 2010 Mk1 capri axle isnt a baby atlas its a narrow atlas, later is wide and cortina are even wider still, the baby atlas is the motorsport item and very rare but as allways happens certain parts get nicknames based on the competition parts (like all type E gearboxes that have sat in an escort boot becoming rocket boxes when are mnost deffinatly not and are just cortina boxes) Goes like this baby atlas 48.5 M1 capri 50 Later capri 52 cortina Mk3/4/5 54 standard escort english axles are 48.5 which is why the baby is as well as it was the competition strength replacement for the english, very VERY fooking rare to find one on a standard car in when you do they are 99% on euro spec cars (NOT to be mistaken for the Koln that nearly all euro spec escorts have) the Mk2 cortina axle is wider than an escort, only half inch so
Jiffer Posted November 25, 2010 Author Report Posted November 25, 2010 Unless this is your daily I'd say race it as is, if you brake it, replace it. If not, all well and good Do you have a rev limiter just in case? the only limiter will be set up on the megajolt but when on running it on the strip might alter that
Jiffer Posted November 25, 2010 Author Report Posted November 25, 2010 I've rang a couple of people today and with what I have read I am just going to run it as is and if or when I break it I will replace it with slightly stronger bits, but I'm looking into a LSD just doing some reading up
Retromotorsport Posted November 25, 2010 Report Posted November 25, 2010 I happen to have a standard baby atlas in my workshop at the moment, drum brakes, spring brackets etc .. of a standard 1300L mk1
Andrade Posted November 25, 2010 Report Posted November 25, 2010 I've rang a couple of people today and with what I have read I am just going to run it as is and if or when I break it I will replace it with slightly stronger bits, but I'm looking into a LSD just doing some reading up Thats exactly what i'm doing on my estate. i'm fitting an LSD and have a set of spare halfshafts. If i end up breaking them i'll buy replacement quaiffe units I doubt i will though from an na engine
xrt_si Posted November 25, 2010 Report Posted November 25, 2010 I happen to have a standard baby atlas in my workshop at the moment, drum brakes, spring brackets etc .. of a standard 1300L mk1 Sounds interesting! How does that work?
Toby Posted November 25, 2010 Report Posted November 25, 2010 Jiffer - did you see this thread? http://www.oldskoolford.co.uk/phpBB2/vi ... highlight= It answers a few of your questions. An atlas is very heavy and most likely not an advantage in your situation, except MAYBE price. To upgrade you need at least a LSD. From there, you'll need fatter shafts. This means expense but must be considered when you spec your diff so you can upgrade. People break std shafts in LSD's all the time at pod - be warned! The quaife "up-graded" 22 spline (standard diameter) shafts don't have a great reputation. A Tran-X Diff with 18 spline shafts are in the region of £800! But it's the best compromise for strength / weight.
James HPE Motorsport Posted November 26, 2010 Report Posted November 26, 2010 It also depends on what spec you will run up the pod, i.e slicks or road tyres! the less grip you have the less likely you are to break a shaft etc! rom there, you'll need fatter shafts. This means expense but must be considered when you spec your diff so you can upgrade. People break std shafts in LSD's all the time at pod - be warned! The quaife "up-graded" 22 spline (standard diameter) shafts don't have a great reputation. Alrite Toby, hows things?? When I first started going pod with my pushrod engine I had the uprated standard spline quaife shafts without a problem!!! Thats not to say that after continuous use that i wouldnt have suffered any failures!!! And my car was fookin light lol
Jiffer Posted November 26, 2010 Author Report Posted November 26, 2010 Jiffer - did you see this thread? http://www.oldskoolford.co.uk/phpBB2/vi ... highlight= It answers a few of your questions. An atlas is very heavy and most likely not an advantage in your situation, except MAYBE price. To upgrade you need at least a LSD. From there, you'll need fatter shafts. This means expense but must be considered when you spec your diff so you can upgrade. People break std shafts in LSD's all the time at pod - be warned! The quaife "up-graded" 22 spline (standard diameter) shafts don't have a great reputation. A Tran-X Diff with 18 spline shafts are in the region of £800! But it's the best compromise for strength / weight. thanks for that Toby
livewire7116 Posted November 26, 2010 Report Posted November 26, 2010 i always thought a mk2 tina english was 50" wide, if you used a std width atlas it would help fill the archs a bit more, or you can shorten it from 52 to 50 and there is enough spline on shafts to trim 1" off the end and have a 50" atlas, obviously you will need to fit new saddles for the springs but it could be done on a reasonable budget and bit of know how
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now