What are you doing tommoz on ya motor?

[BIG G]

for me its

new front springs 325lb

fit hydraulic hand brake kit

refill badly leaking gear box with oil

clean dust off

then go for a rip around north wales

 

[banarama]

was going to put master cylinder back on bleed brakes,,etc,, and tax it, not sure now /as they forcast rain here

[Guest cortinamad-gonetoo]

probally not much tomorrow but next week stripping down another mk5 for spares.

[squadge78]

welding on capri,oil change on fiesta.

[Fiesta Steve]

Fitting a 'hot start' kit to my Range Rover

 

Might do a bit on my x-flow in the evening though

[5hane]

same as last week, and the week before.

 

 

fook, all.

 

 

[mexman123]

Going to fookin work...

Saturday and Sunday..................

[Billy_smith]

nuthin on me scort but going to get the ramp for me and me dads unit

[sambo]

Off to work from 7 till 12 then I will be working on the old mans mk1 escort with him to try to get the gearbox on. Its giving us some grief at the moment... we think the spigot is knackered.

 

If i get time time i'll be popping over to my brothers to see if the new hose fittings i just got will complete my dry sump set-up.

 

Busy, busy!

[over_head_cam]

Hopefully I'll be puling out the old side valve and making room for the crossflow

[lotusless]

errrrm just driving it

[pauln]

errrrm just driving it

 

 

Same here

[4DOOR-SHERWOOD]

gonna skim the rear discs on the mex as pitting on inner edge, also fancy changing the front springs....lets see how I feel tomorrow...off out round the town now!

[ratman]

Fix an exhaust clamp as it’s the only bit I didn’t do in the week when I had to take off the manifold to fix a broken wire on the back of the alternator

[Jiffer]

will be fitting new leccy ignition to mk1 cortina, drinking strong bow and watching the mighty Fulham stuff spurs

[escort21]

Trying to repair my landrovers shit power steering

[.pete.]

finish primer hopefully either tomorrow or Sunday. Maybe change front seats to the GT ones.

[Slammed]

finish painting my lotus steels, i got loads to paint

[Beakster]

Selling it hopefully (The Ford Thunderbird) and going to see a Mercury Capri mk2.

[deltamal]

Cutting the manky rear end off the beavertail, and welding a new one on, collecting the Corty in the afternoon from JRE motorsports, new bits and pieces fitted!

[Skimmer]

Re-fitting the drivers side exhaust manifold (on my 1954 V8 Pop) i took off today and rebrazed a couple of cracked bits ??? never seen before but now as good as new then giving a blast.......................but something will go wrong ...

[lurch914]

work tomorrow 5 till 2, hopefully get the welding done on the mex and do the rear brakes if i can get some new rear cylinders, then its just put the interior back in and then final checks before MOT, a busy weekend for me i think

[banarama]

good luck should be easy job

[Haynesmanual]

Im going to finish the tunnel in my old mans 100e and if i get time fit a rev counter in the cortina

[v8steveie]

Putting 2.9 lump in the cappa today and then getting it ready for a lower half respray ...