Fiesta Steve Posted February 5, 2006 Author Report Posted February 5, 2006 Cheers m8, it is very tidy. Its got a genuine 60k from new and the interior is mint as well. I want to lower it a little bit and fit a boot spoiler as its bum looks naked without one
Fiesta Steve Posted February 5, 2006 Author Report Posted February 5, 2006 hmmmm slammed , stripped , lairy xflow It may get a 1700 in there before long, lol
mart @ fpe Posted February 5, 2006 Report Posted February 5, 2006 looks nice fella my m8s has got this for sale block rebore 1700cc comppetition pistons reground polished crank main bearings big end bearings thrust washers tough ride crank race modified cylinder head bronze valve head guides performance camshaft performance followers full dynamic engine balance lightened and balanced flywheel (face flywheel) skin block face machined deeper valves piston cut outs skimmed head face cam bearings new oil pump competition timing chain borgen beck paddle clutch duplex double valve springs olden competition distributor with side exit leads weber 40 dcoe's ashley inlet manifold burton steel rocker cover pipercross oil breather enlarged alloy rad with overide switch filterking filter regulartor facet fuel pump bosch coil £650 for the engine
Guest Dee Posted February 5, 2006 Report Posted February 5, 2006 It sure needs lowering fella, and it looks mint
Jimsiss Posted February 5, 2006 Report Posted February 5, 2006 Lower it and Stick a spoiler on! then you'll be sorted!
Fiesta Steve Posted February 5, 2006 Author Report Posted February 5, 2006 looks nice fella my m8s has got this for sale £650 for the engine Cheers m8 but it won't be getting anything with twin webers, i've got one Fiesta pushing 150 bhp already and this is my daily drive. Cheers for all your wonderful comments
Jimsiss Posted February 5, 2006 Report Posted February 5, 2006 You putting arch trim on it or leaving it?
sidewayz Posted February 5, 2006 Report Posted February 5, 2006 yep thats looks tidy as.... def get it slammed mate
Fiesta Steve Posted February 5, 2006 Author Report Posted February 5, 2006 You putting arch trim on it or leaving it? Deffinatly not putting arches on it. I've got two XR2's already I don't need a look-a-like as well. If the arches were rot, i'd consider it but they are mint so it staying original. You don't see many 1300 Sport's anymore in orignal guise, so I think i'll leave well alone.
boab Posted February 5, 2006 Report Posted February 5, 2006 looks well tidy!!will look nice lower !smart
Cookie Posted February 5, 2006 Report Posted February 5, 2006 had loads of mk1 fezzas back in the day and they are really growing on me again now, looking like a lovely example the new one mate
john_3.0s Posted February 6, 2006 Report Posted February 6, 2006 rare as roking horse now days mate, good to here it'll be kept standard(ish) looks v tatsty as it is
Johnson Posted February 8, 2006 Report Posted February 8, 2006 im lovin it, 175/50's and some lower springs should do it..... oh and marts mates 1700.
Fiesta Steve Posted February 9, 2006 Author Report Posted February 9, 2006 im lovin it, 175/50's and some lower springs should do it..... oh and marts mates 1700. The black XR2 below is running 195 / 45 / 13 and has about 2 inch of ground clearece, and should be pushing out about 150 bhp by now . Anything less would probably be a dissapointment as I would be comparing them . I have a balls-out Fiesta and I don't need two, this is my daily drive to work so will remain half sensible . The tyres on it are 175 / 60 which are condsiderably lower than the 185 /60 that it came with, and I will be lowering it slightly just to close the gap up a bit . I may stick a 1700 (with twin choke) in it eventually as I have many XR2 engines spare, but i'm in no rush, if I want to go fast I just jump in the black one. Thanks for all your nice comments people
Doc Posted February 9, 2006 Report Posted February 9, 2006 You putting arch trim on it or leaving it? Deffinatly not putting arches on it. I've got two XR2's already I don't need a look-a-like as well. If the arches were rot, i'd consider it but they are mint so it staying original. You don't see many 1300 Sport's anymore in orignal guise, so I think i'll leave well alone. Mate you got it right ! Thats exactly as it should be but lowered original paint and graphics and the original engine its very cool ! Oh and i wouldnt put a spoiler on . It looks right on the button now . ! Good work fella !
Col-ashtonmobile Posted February 9, 2006 Report Posted February 9, 2006 LOVE THAT FIESTA MATE , WELL DONE
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now