accord83 Posted March 12, 2018 Report Posted March 12, 2018 1 hour ago, Nick Heer said: what size tyres you running 175/50/13
DT36 Posted March 12, 2018 Report Posted March 12, 2018 3 hours ago, Nick Heer said: dig them out and post them to me lol These are some of the bits I had done on that batch. 1
Nick Heer Posted April 16, 2018 Author Report Posted April 16, 2018 well i decided to have the steels but the 5.5j as i liked the bigger dish on them only think now is black decals or not 2
Rich T Posted April 16, 2018 Report Posted April 16, 2018 All paint. I saw the stickers on ebay but the seller sead there were a few variants in sizes and may not be a perfect fit. And i was worried about sticker peel at a later date. I had the wheels shot blasted. Then i primered, wetflatted and painted the wheels silver. Waited a few weeks then masked them up for the black. Waited another week and laquered them. 2 hours per wheel of masking up. Apparently the way to do it is paint the wheel centre black, mask off the sections then paint over with the silver. I must have too much time on my hands lol. Yes they are 5.5j wheels
Rich T Posted April 16, 2018 Report Posted April 16, 2018 This ^^^ i typed a few weeks ago lol. Thought id add it to the thread anyway. Good choice by the way . Get the decals. If you dont like em, peel em back off
Nick Heer Posted April 27, 2018 Author Report Posted April 27, 2018 will leave steels or shall i go for RS alloys ?
Moderator Rally Pack 2000 Posted April 27, 2018 Moderator Report Posted April 27, 2018 Steelies. They give the 1300e a distinctive look unique to it. RS alloys will just confuse it with a Mexico or something. 1
preacherman Posted April 27, 2018 Report Posted April 27, 2018 1300 is to classy to wear rs alloys or any type of wheel associated with rallying etc. Dartboard Wheel is widened to 6.5j would look good with 185 x 55 x 13
Ray Posted April 27, 2018 Report Posted April 27, 2018 1 minute ago, preacherman said: 1300 is to classy to wear rs alloys or any type of wheel associated with rallying etc.
Ray Posted April 27, 2018 Report Posted April 27, 2018 2 minutes ago, preacherman said: Dartboard Wheel is widened to 6.5j would look good with 185 x 55 x 13 he doesn't need any encouragement lol
Ray Posted April 27, 2018 Report Posted April 27, 2018 1 hour ago, Rally Pack 2000 said: Steelies. They give the 1300e a distinctive look unique to it. RS alloys will just confuse it with a Mexico or something.
Nick Heer Posted April 28, 2018 Author Report Posted April 28, 2018 well that's decided the MK 1 RS alloys will go back in the garage shame really because they are original MK 1 5.5j was going to re-furbish them to original spec and colour
colr6 Posted April 28, 2018 Report Posted April 28, 2018 You could always screw one to the wall and use it for keeping your hose pipe tidy.....lol 2 2
Rich T Posted April 28, 2018 Report Posted April 28, 2018 Why not get them refurbed, new tyres and fit them? Have 2 sets of wheels and change them as your mood suits. I doubt you would be the 1st or last person to have a few sets of wheels for a car. Prefer steelies myself but its your car not mine. Rich
Monza Posted April 28, 2018 Report Posted April 28, 2018 YOUR car nick...YOU fit what YOU like...end of. Every body will have an opinion at the end of the day. Personally I like the mex steelies but again I have 4 different sets for when I change my mind!! Like the idea of a hose pipe holder tho Sent from my SM-G900F using Tapatalk
deltamal Posted April 28, 2018 Report Posted April 28, 2018 I've just fitted the sport 5.5 stelies on my Cortina Crusader, had them shot blasted and powder-coated in silver with a fine flake, I fitted the vinyl decals and then had the wheels clear lacquered so they don't peel, I'm now hunting down some steel embellishers to finish it, trying to keep the Crusader fairly standard.
preacherman Posted April 28, 2018 Report Posted April 28, 2018 7 minutes ago, deltamal said: I've just fitted the sport 5.5 stelies on my Cortina Crusader, had them shot blasted and powder-coated in silver with a fine flake, I fitted the vinyl decals and then had the wheels clear lacquered so they don't peel, I'm now hunting down some steel embellishers to finish it, trying to keep the Crusader fairly standard. I got some 13inch ones off ebay. Fair play they fit very well and shiny.
Moderator Rally Pack 2000 Posted April 28, 2018 Moderator Report Posted April 28, 2018 7 hours ago, Nick Heer said: well that's decided the MK 1 RS alloys will go back in the garage shame really because they are original MK 1 5.5j was going to re-furbish them to original spec and colour They do look nice as well. Would go well on my Twincam actually.
Moderator Rally Pack 2000 Posted April 28, 2018 Moderator Report Posted April 28, 2018 7 hours ago, colr6 said: You could always screw one to the wall and use it for keeping your hose pipe tidy.....lol Why waste a good hose putting it on the wall? Steelies are versatile.
Nick Heer Posted April 28, 2018 Author Report Posted April 28, 2018 33 minutes ago, Rally Pack 2000 said: They do look nice as well. Would go well on my Twincam actually. tempt me with an offer you never know
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now